49.9959.992

STEP 22 Gear

Hi-Lift Jack Cover - Radiant Red

Jackcovers.com is now STEP 22 Gear

RADIANT RED | Our Hi-Lift Jack Covers are a must have accessory! Originally known as Jackcovers.com, our patented Hi-Lift Jack Covers are built with uncompromising durability for years of protection and are designed to stand up to even the most demanding and rugged env
STEP 22 GearHi-Lift Jack Cover Radiant Red_03

STEP 22 Gear

Hi-Lift Jack Cover - Radiant Red

Jackcovers.com is now STEP 22 Gear

From: $49.99
Description

RADIANT RED | Our Hi-Lift Jack Covers are a must have accessory! Originally known as Jackcovers.com, our patented Hi-Lift Jack Covers are built with uncompromising durability for years of protection and are designed to stand up to even the most demanding and rugged environments!!  Are you tired of your neoprene jack cover fading and falling apart? Are you tired of your jack cover wearing out with holes, and the seams coming apart?  Other jack covers on the market are designed to fail, so you get stuck buying the same product over and over again.   Our Jack Covers help keep your jack lubricated and rust free, as well as free of dirt and grime, so when you need to use your jack it will actually work.  We all know how dangerous a Hi-Lift jack can be.  A dirty, dry, rusted, and non-lubricated jack is even more dangerous.... even deadly!  Don't get caught in the middle of nowhere with a dry and rusty jack that doesn't work.  STEP 22 Gear produces the highest quality protective jack cover on the market today.

Our number two best seller!  This is a true RED cover with a carbon fiber pattern. This color is a near exact match for Radiant Red Tacomas and FJ Cruisers. If you are looking for a true red this cover with its carbon fiber pattern looks sharp with almost anything you pair it with!  The carbon fiber pattern is very clean looking and adds a little character to the cover.  The pattern is cosmetic only as all of our Jack Covers are equally strong!  The pattern does not make it any harder to clean (as it is just a pattern "print" there are no real fibers for dirt to get stuck in ;)

To determine the right size cover for your mounting solution, click on the Jack Cover Sizing tab just above.  Feel free to contact us if you have any questions or are not sure which cover is right for you!

  • TRIPLE LAYER CONSTRUCTION - NEOPRENE/PIQUE LINER - PREMIUM MARINE GRADE VINYL SHELL
  • 100% VIRGIN UV STABILIZED PIGMENTS WITH MILDEW AND ANTIMICROBIAL TREATMENT
  • HEAVY DUTY #10 MARINE GRADE ZIPPER MADE FROM UV STABILIZED DUPONT DELRIN ACETAL RESIN
  • HANDCRAFTED IN THE USA USING ONLY THE FINEST MATERIALS AVAILABLE
  • JACKCOVERS.COM IS NOW STEP 22 GEAR - SAME GREAT JACK COVERS - NEW NAME
  • 11" JACK COVER U.S. PATENT NO. D767,848 15" JACK COVER U.S. PATENT NO. D789,645
Jack Cover Sizing

Our Custom Jack Covers are available in two standard lengths - 11" and 15" (these are the lengths of the zippers). The best length cover for your jack depends on the type of mounts you use, which jack bar holes your mounts use, and the placement of your running gear (parts of the jack the cover protects). Minor adjustments to your jack mounting setup (when possible) can allow for use of the longer cover if desired. For reference, our 11" cover is 1 hole shorter than the Hi-Lift brand of neoprene covers.


The best position for a horizontally mounted jack is with the nose facing up whenever possible. This allows the Jack Cover to do the best job of keeping your jack clean and dry. When possible, avoid mounting your jack/cover with the "nose" of the running gear facing down. As the zipper and zipper tape are not waterproof, some water can get past them and into the cover. Although the cover does still keep out dirt and grime when mounted nose down, it is not the ideal position for mounting. Because some mounting situations require the jack to have the nose facing down, all of our covers are made with a grommet in the nose section to allow for water draining during extreme storms and deep water crossings. The grommet is just large enough for water to drain out when mounted nose down, but not so large that is lets much water in when mounted nose up.


If you mount your jack with the running gear in the lowest position (where is rests on the base of the jack) both of our covers will work fine.  The 11" version will cover 2-2.5 holes above the running gear and the 15" version will cover 8-8.5 holes (depending on which version jack you have).  If you do not mount your jack with the running gear in the lowest position, but rather with it "floating" somewhere along the bar, the available jack bar holes on both sides of the cover are the same regardless of which version jack you have. Sample photo of a "floating" running gear below, including details of the number of holes covered by both size options.

If you still are not sure which size is right for you feel free to contact us for some help.  We don't bite!

 Hi-Lift Jack Cover Sizing

 

FAQ

US vs THEM
Your other option is to support China's economy by buying something that is designed to FAIL! The bottom line is this....  We love Hi-Lift Jacks! You really can't find a better jack of its kind on the market.  Other jack covers on the market, however, are nowhere near the quality of a long lasting marine grade product.  If you want the hands down best product to protect your jack, and look pretty darn cool while doing it.... our Jack Covers are the only hand-crafted, all weather, triple layer, truly UV stable, marine grade, customizable, U.S. made, jack covers available on the market today!  Some of our users say the awesome look alone adds 15 horsepower!*  As the saying goes... YOU GET WHAT YOU PAY FOR! Sure there are cheaper covers on the market… but if you have to buy that product 3 or 4... or 10 times over a lifetime are you really saving money??


ARE YOUR COVERS MADE IN THE USA
YES!  Our Jack Covers are made right here in Southern California!  And no, that doesn't mean we just buy a bunch of cheap Chinese materials and assemble them here in the U.S.  We believe that in order to make the highest quality products possible you have to start with the best materials available and then have total control of the manufacturing process.  We have sourced the highest quality U.S. made materials wherever possible, along with the highest quality American Craftsman.  We believe that U.S. based companies should support domestic economies and small businesses whenever possible.  Sure, using this method adds a little cost in the long run... but we are confident that the quality of the products we deliver far outweighs that added cost; we hope you agree! Please join us in supporting American made products!


ARE YOUR JACK COVERS WATERPROOF
Yes, the cover itself is waterproof.  With our triple layer design including marine grade vinyl and 100% neoprene rubber, water has no chance of getting through the cover. Keep in mind though; it is not possible to prevent 100% of water/dust/zombie slime, etc. from getting beyond the open ends of the cover.  What our covers do is keep out a vast majority of elements that would otherwise wreak havoc on your jacks mechanical parts; they also help to keep your jack dry, properly lubed, and protected.  Remember...A DIRTY JACK IS A DANGEROUS JACK!!  Under normal conditions you will not even need to re-lube a properly lubricated and protected jack before each use.  Always lubricate your jack as directed by the factory instruction manual (legal speak for... always do what the Hi-Lift directions say first).  For overall rust prevention we recommend using a dry lube on the entire running gear (allow it to fully dry) before installing your cover.  Feel confident knowing that when you need to use your jack you will find it clean, lubricated, and ready to use.


WILL YOUR JACK COVER PREVENT RUST
Well.... not by itself....  jacks often rust because the coating (paint/powder coat) applied at the factory is thin, and when it chips and flakes off, bare steel is exposed.  Any time you mix air, moisture, and bare steel you are going to end up with corrosion over time.  As it is not possible to create a water/air tight cover, you can eventually end up with some rust spots on your jack if you don't apply proper protection.   For proper and safe operation always lubricate your jack as directed by the factory instruction manual.  In addition to the factory recommended maintenance and to prevent rust we recommend coating the entire running gear (parts covered by your jack cover) with a good quality dry lubricant/protectant with PTFE.  Dirt will not stick to equipment lubricated with a dry film, and metal surfaces protected by a quality dry film lube will not corrode!  We have good luck with DRI-FILM by Super Lube and Blaster Dry Lube.  WD-40 recently started selling a dry lube/ PTFE spray that is another good alternative for coating your jack's running gear. Wet lube products like WD-40 (original formula) act as an attractant to dirt and grime when they are used to cover large sections of your jack, and can sometimes cause more problems than they fix!!  While wet lubes are fine for use on the specific parts of the running gear that require lubrication for operation, we do not recommend coating the entire running gear with wet lube for the purpose of rust prevention.  With a good coat of dry lube on the running gear, and use of one of our Custom Jack Covers, even jacks with chipped coating will be highly corrosion resistant.


WILL COVERING A JACK CAUSE RUST
No. Some people think that simply covering their jack alone will actually cause rust; that is not true. As explained above, rust is a result of chipped and worn off paint.  Under normal use the cover helps to keep the running gear nearly dry, helping to prevent rust. As our covers are made from nearly all 100% water proof material the amount of water, rain, etc. that gets beyond the edges of your jack cover will depend on you mounting setup and the conditions you encounter.  If the factory coating has flaked or chipped off your jack leaving bare steel exposed it is important that to prevent corrosion you remove any surface rust and coat those areas with a high quality dry lube and keep your jack covered with a jack cover.  Using a jack cover also helps the protective layer of jack lubricant/dry lube last even longer, keeping your jack rust free and always ready to use for years to come.  Our jack covers are designed so that any water that does sneak in is able to easily and quickly dry, rather than be held in like it is with other covers on the market.


HOW DO I CARE FOR MY COVER
You will find that under average conditions your Custom Jack Cover requires very little attention.  Depending on the location you have your jack mounted, some atmospheric grime (aka kamikaze bugs, UFO exhaust, etc.) might accumulate over time.  Mild soap and water is all that is needed for regular cleaning.  For heavy soiling use a 1:1 solution of water and a common household cleaner such as Formula 409, Fantastik, or Mr Clean.  303 Products Fabric and Vinyl Cleaner is also a great product.  Do NOT use alcohol based cleaning agents. There are a number of cleaner/protectant products on the market that work well and will help to keep your jack cover looking new for many years.  303 Aerospace Protectant is one of our favorites.  While your cover is already UV stable and weather resistant 303 not only adds an additional layer of SPF 40, it adds protection from the elements and will help repel dust, dirt, smudges, and stains.  This is a great silicone free product that finishes dry with no greasy or oil feel.  If you are not familiar with 303 products look em up! 303 Aerospace Protectant is an amazing product; we use it to protect nearly everything we can around the shop and on all of our vehicles.  A little bit goes a long way and you can use it for tons of other applications like plastic panels, dashboards, tires, plastic fenders, engine parts, etc. 
If you take your off road rig into serious mud pits or extremely dirty environments we recommend you remove your cover and give it, and your jack, a good cleaning after each outing.  It is also a good idea to remove your jack cover whenever you wash your vehicle (you do wash your vehicle right!?) just to make sure no foreign objects have made it their home without paying rent!  Remember, never use a jack that is not properly lubricated and in clean working condition.  A jack cover makes keeping your jack clean and lubricated a whole lot easier!  In addition to following the factory recommended lubrication, we highly recommend using a dry film lubricant on the running gear for long lasting lubrication, rust prevention, and to avoid attracting dirt/grime like wet lubes can do.

 

Warranty Info

Jack Cover Warranty


We guarantee our Custom Jack Covers are the highest quality UV stable marine grade jack covers available. We guarantee our products will be free of defects in material and craftsmanship when they arrive. We personally inspect each and every cover for proper construction and fitment before it ships. If you receive a defective or damaged product please let us know right away and we will take care of you immediately (in addition to cranking out some extra punishing shock therapy for the craftsman and delivery driver)!

Our warranty covers a 6 month period from the date of purchase, and is a common sense based policy. If your cover breaks as a result of defective materials and/or workmanship, or failure of any of the components (i.e. "our fault") we will repair or replace it. If you purposely or accidentally abuse, misuse, or fail to properly maintain your cover (i.e. "your fault") service will be on a case by case basis. We really want to do whatever we can to take care of our customers... but if you want to test the durability of your cover by wrapping it around a few sticks of dynamite and blasting it with your AR... well... we probably won't be able to help you!! **

Treat your cover well, with proper care and a little common sense, and it will take care of you for many years to come!! For a complete list of terms and conditions click here.

Examples of some things not covered include, but are not limited to:

  • Climbing Pins (when direction lever is in DOWN position they protrude), Jack mounts, mount bolts, wing nuts, etc. digging into the cover causing wear marks or holes. Aways store your jack with the direction lever in the UP position.
  • Additional accessories, straps, etc. being tied to or near the cover causing tears or holes.
  • Rips/tears caused by dropping/placing a covered jack on the ground, rocks, etc.
  • Damage caused by items such as shovels, axes, spare tires, etc. mounted on or near the jack.
  • Any misuse or abuse resulting in a damaged cover.

** We are all for good fun at the shooting range but we are not suggesting the use of explosives for the purpose of testing the durability of our jack covers. While we do believe our covers are solid... we do not think they would hold up to high powered explosives, so please do not try, sorry. Always remember the 10 rules of firearm safety when bowing stuff up.

Specifications
Attachments
Application List
ImageSKU / Part NoApplicationStockPriceAdd to Cart
JC11-RAD-RD JC11-RAD-RDSize: 11 InchOut of Stock$49.99BUY
+ -
JC15-RAD-RD JC15-RAD-RDSize: 15 InchOut of Stock$59.99BUY
+ -
You might be interested in these items
Questions & Answers

Be first to ask a question


STEP 22 Gear is dedicated to 100% customer satisfaction. We are passionate about our products and the products we carry, and hope we can share that passion with you when you visit us. Should you find any errors on our website, or should you have any questions at all, please do not hesitate to let us know. Don’t forget to follow and tag us on social media! THANKS FOR YOUR INTEREST IN STEP 22 GEAR!

SIGN UP FOR OUR NEWSLETTER
and receive special deals and discounts.

CONTACT

STEP 22 Gear (MAIL ONLY)
13446 Poway Road #403
Poway, CA 92064
Phone: (949) 445-6800
Fax:(949) 334-0686

For a faster response, please send us an e-mail with any questions or information requests you have.

Email: contact@step22gear.com

TEASoftware