$$50.00In stockSTEP 22 Gear \ Recovery GearAS2-903PME-SP-FT
AS2-3PM-4-GY

STEP 22 Gear

Anchor Strap | 3 Inch | MBS 44,300 LBS

4 Feet

MADE IN THE USA! Think of this 2-ply, 3-inch wide, 4-foot-long Anchor Strap as a versatile recovery tool. It is designed to aid in a number of recovery/repair situations. Made of polyester, this Anchor Strap will not stretch under load like o
STEP 22 GearAnchor Strap | 3 Inch | MBS 44,300 LBS_01

STEP 22 Gear

Anchor Strap | 3 Inch | MBS 44,300 LBS

4 Feet

$50.00

Item #: AS2-3PM-4-GY

Quantity:
In Stock
Add to Cart
Add to Wishlist
  • Create a New List
Description

MADE IN THE USA!  Think of this 2-ply, 3-inch wide, 4-foot-long Anchor Strap as a versatile recovery tool.  It is designed to aid in a number of recovery/repair situations.  Made of polyester, this Anchor Strap will not stretch under load like other nylon recovery straps.  This Anchor Strap is perfect for wrapping around roll bars, frames, axels, rock sliders, etc.  It can be used when a vehicle does not have proper recovery points, when a vehicle is stuck in an awkward position and traditional recovery points are not ideal, and also as an aid in field repair to apply force to bent tie rods, etc.  We added a fully sewn protective sleeve along the entire length of this strap since it will be wrapped around a number of points on a vehicle or other objects.  Underneath the protective wrap, we have even gone one step further and used our Heavy Duty reinforced edges on the entire length of the strap as well to ensure this is a work horse that will last a long time.  At 4 feet long, it is the perfect length for a nearly endless number of unique uses, and at 2.5 pounds it is small and easy to store.   When used in a basket configuration (its most intended design) this strap has a MBS of 88,600 LBS and a WLL of 17,720 LBS.  It can also be used for straight pulls as a winch extension where it would have a MBS of 44,300 LBS and WLL of 8,860 LBS.

Because there are so many terms in circulation that are often misused or misunderstood, STEP 22 clearly labels all of our recovery gear with easy to understand information including material, intended use, ratings/sizes with conversions, etc.

When the safety of you and your rig are on the line don't settle for inferior recovery gear!  STEP 22 Gear manufactures the highest quality recovery ropes and straps available on the market, right here in Southern California.  IF YOU ARE NOT FAMILIAR WITH MBS/WLL AND THE TRAIL WEIGHT OF YOUR VEHICLE PLEASE CONSULT A PROFESSIONAL OR CONTACT US WITH QUESTIONS. 

Not sure about MBS vs WLL?   Minimum Breaking Strength (MBS) is the minimum amount of load that can be placed on a strap before it completely fails.  This number is determined by industry standard testing and is listed strictly on test results.  Work Load Limit (WLL) is created by either the manufacturer and/or the end user.  WLL is determined by something called design factor, a fraction/ratio of MBS.  Some manufacturers will use a design factor as low as 2:1 (un-safe).  The most common design factors are 3:1-5:1.  To determine a design factor take the MBS and divide it by the WLL.  For example, a rope with a MBS of 20,000 LBS and a WLL of 5,000 LBS has a design factor of 4:1.  STEP 22 Gear uses a design factor of 5:1.  Many manufacturers will not list a WLL, and instead rely solely on the end user to determine this number.  We feel this is misleading as some users can be confused by the number listed only as "rating" etc. Using only MBS can also lead some users to mistakenly believe that number is actually the safe WLL.  5:1 is on the higher end of design factors and is intended to help keep users safe during recovery exercises.   It is your responsibility to understand and properly apply design factor limits and to consider all risk factors prior to using any recovery device or product. 

  • DO NOT SHOCK LOAD THE STRAP
  • Full wrap protection sewn along the entire length
  • 3 Inch | 2 Ply Anchor Strap
  • 13 inch Properly Tapered Fully Wrapped Eyes
  • Straight Pull MBS 44,300 LBS - 20,094 KGS
  • Straight Pull WLL at 5:1 - 8,860 LBS - 4,019 KGS
  • Basket WLL at 5:1 - 17,720 LBS - 8,036 KGS
  • 100% Polyester
  • Weight | 2.5 LBS
  • 4 Feet Long
  • MADE IN THE USA
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Specifications
Specifications
Length4 Feet
Width3 inch
Ply2 Ply
MBS44,300 LBS
Weight2.5 LBS
MaterialPolyester
OriginUSA
General
Item #AS2-3PM-4-GY
BrandSTEP 22 Gear
Category ALL STEP 22 Gear All Recovery and Tools Ropes / Straps / Shackles
You might be interested in these items
Safety Info

Inspect Recovery Strap before each use. Do not use a damaged strap. Avoid dragging the strap. Do not tie strap into knots. Do not attach strap to bumpers. Avoid contact with hot exhaust systems. Do not exceed Strap Work Load Limits. Attachment points must be suitable for the application and should exceed the break strength of the strap. Detached connection points can become deadly projectiles.

Stand far away from the vehicle and strap while under tension. Never stand near or in line of a strap under tension. DO NOT SHOCK LOAD THE STRAP. You must consider all factors such as suction and incline to ensure that you maintain control of all materials and components used for recovery, including dynamic loading and tension. If you are not capable of determining loading factors, use load measuring devices or equipment controls to avoid overloading. If these options are not available, DO NOT USE THE VEHICLE STRAP. IMPROPER USE MAY RESULT IN INJURY, DEATH AND/OR PROPERTY DAMAGE. Avoid edges or surfaces that could damage the strap. Use protection to prevent damage to the strap.

Removal From Service
The entire Strap/Rope must be inspected regularly, and it shall be removed from service if ANY of the following are detected:
- If sling identification tag is missing or not readable.
- Holes, tears, cuts, snags or embedded materials.
- Broken or worn stitches in the load bearing splices.
- Knots in any part of the sling webbing.
- Acid or alkali burns.
- Melting, charring or weld spatter on any part of the strap.
- Excessive abrasive wear or crushed webbing.
- Signs of ultraviolet (UV) light degradation.
- Distortion, excessive pitting, corrosion or other damage to fitting(s).
- If provided, exposed red core yarn. However, if damage is present and red yarns are not exposed,
DO NOT USE the strap.
- Any conditions that cause doubt as to the strength of the web sling.

Photographic examples of aforementioned conditions can be found under the Downloads tab.

Inspection
A specific procedure for Strap/Rope inspection is the best safeguard against injury, death and property damage. It is important that you employ a three stage, level of inspection to ensure that slings are inspected with the appropriate frequency. It is also important that all inspections must be done by trained and qualified personnel.

Initial Inspection - Whenever a Strap/Rope is initially received, it must be inspected by a designated person to help ensure that the correct Strap/Rope has been received and is undamaged and that the Strap/Rope meets applicable requirements for its intended use.

Frequent Inspection - The Strap/Rope should be inspected before each use, during extended use, and after each use.

Periodic Inspection - Every Strap/Rope must be inspected "periodically" by a qualified and designated person. In order to validate the frequent level of inspection, the periodic inspection should be performed by someone other than the individual(s) who most commonly performs the frequent inspection. The frequency of periodic inspections is based on the Strap/Ropes actual or expected frequency of use, severity of service conditions, the nature of the work performed with the Strap/Rope and experience gained during the inspection of other Strap/Ropes used in similar circumstances.


General guidelines for the frequency of periodic inspections are:
- Normal service—yearly
- Severe service—monthly to quarterly
- Special service—as recommended by a qualified person
Periodic inspections intervals must not exceed one year.

To detect possible damage, you should perform a visual inspection of the entire Strap/Rope and feel along its entire length, as some damage may be felt more than seen. You should look and feel for any of the types of conditions listed in the Removal from Service Criteria, see "Removal from Service".

If you identify ANY of these types of damage in a Strap/Rope, remove it from service immediately, even if the damage you see or feel is not as extensive as shown in example photos. Straps/Ropes that are removed from service must be destroyed and rendered completely unusable unless they can be repaired and proof tested by the manufacturer. Never ignore damage or attempt to perform temporary field repairs of damaged Straps/Ropes, (i.e., tie knots, etc.).

If you are not sure whether or not a sling is damaged, DO NOT USE IT.

Any hazardous condition disclosed by an inspection shall require strap replacement. Temporary repairs are not permitted.
Damage and wear seriously reduce vehicle strap work load limits.

Always know the load weight and select the appropriate vehicle strap for the load.

Ensure that the load will not cut the vehicle strap during use by padding corners, edges, protrusions or abrasive surfaces with
suitable materials of sufficient strength, thickness and construction.

Care Cleaning and Storage
To prevent damage to Straps/Ropes, when not in use, we recommend that they be stored in a proper location.
Make sure the location is:

COOL To prevent damage resulting from exposure to excessive temperatures.
DRY To prevent the growth of mold and mildew, which can degrade synthetic fibers.
DARK To prevent the detrimental effects of prolonged exposure to sources of ultraviolet light.
FREE OF ENVIRONMENTAL/MECHANICAL DAMAGE
Ventilated and not exposed to heat and chemical exposure, sunlight, weld spatter or grit and splinters from grinding or machining.
Straps/Ropes should also be kept clean and free of dirt, grime and foreign material. Mild soap and water can be used for this purpose. Hard bristle brushes damage webbing, consider using a sponge. Soaking Straps/Ropes in mild soap and water for short periods of time is non-damaging. After cleaning, rinse slings thoroughly and allow them to completely dry before returning them to storage. A clean Strap/Rope, free of dirt and grime is easier to inspect for damage. Consider replacing Straps/Ropes, instead of attempting to clean. The time, energy and resources necessary to be a launderer may exceed the purchase price of replacement gear.

Steam cleaning can damage Straps/Ropes.

Power or pressure washing can force residue inside web and yarn fibers. The foreign material can cause internal yarn and fiber damage.

Straps/Ropes are severely damaged by machine washing, resulting in a serious loss of strength.

Questions & Answers

Be first to ask a question


STEP 22 Gear is dedicated to 100% customer satisfaction. We are passionate about our products and the products we carry, and hope we can share that passion with you when you visit us. Should you find any errors on our website, or should you have any questions at all, please do not hesitate to let us know. Don’t forget to follow and tag us on social media! THANKS FOR YOUR INTEREST IN STEP 22 GEAR!

SIGN UP FOR OUR NEWSLETTER
and receive special deals and discounts.

CONTACT

STEP 22 Gear (MAIL ONLY)
13446 Poway Road #403
Poway, CA 92064
Phone: (949) 445-6800
Fax:(949) 334-0686

For a faster response, please send us an e-mail with any questions or information requests you have.

Email: contact@step22gear.com

TEASoftware